PRODUCTIVITY OF A YUCA MANUAL HARVESTING METHOD WITH AN EXTRACTING DEVICE
Abstract
The objective of this trial was to evaluate the effectiveness of a manual extracting device to harvest yucca. The research was realized at El Ejido Experimental Station, in Los Santos. A completely randomized statistical design was applied on a 500 m2 plot having a planting density of 10,000 plants per hectare. Two treatments were established: manual harvest with the extracting device and manual harvest without the extracting device. Harvesting time of yucca plants was registered as well as the quantity and weight of commercial and non commercial roots extracted. Statistical analysis consisted of t-Tests for the comparison of means. The relation between root weight in kilograms (in function of the harvesting methodology as dummy variable) and time in minutes used for harvesting were analized using an econometric log-linear model. The results indicate that the number of harvested plants per minute was superior for manual harvest with the extracting device, an average of one plant/minute, more than with manual harvest without the device. The model predicted that, with the extracting device, harvested weight would be 123% greater than that of manual harvest without the device, as an average. It is concluded that harvest method with the extracting device showed a superior productivity. Due to agricultural hand labour scarcity, a greater efficiency in time of harvesting would reduce its usage.
Most read articles by the same author(s)
-
RELATIONSHIP BETWEEN MAIZE GRAIN YIELD AND THE NORMALIZED PRECIPITATION INDEX IN AZUERO
Román Gordon-Mendoza, Jorge Iván Núñez-Cano, Jorge Enrique Franco-Barrera, Ana Elida Sáez-Cigarruista, Jorge Enrique Jaén-Villarreal
-
GENETIC COEFFICIENTS OF TWO CULTIVARS OF CORNS, AZUERO - PANAMA
Ana Elida Sáez-Cigarruista, Román Gordón-Mendoza, Jorge Iván Núñez-Cano, Jorge Enrique Jaén-Villarreal, Jorge Enrique Franco-Barrera, Francisco Ramos-Manzané, Aurisbel Ávila-Guevara
-
RICE WATER INDEX UNDER WATER STRESS AND HIGH TEMPERATURE CONDITIONS
Luis Alberto Barahona-Amores, Román Gordón-Mendoza, Rubén Samaniego-Sánchez, Gustavo Castillo-Vega
-
WATER INDEX OF TWO MAIZE CULTIVARS UNDER TWO SEED SYSTEMS
Jorge Iván Núñez-Cano, Román Gordón-Mendoza, Jorge Franco-Barrera, Jorge Jaén-Villarreal, Ana Sáez-Cigarruista, Francisco Ramos-Manzané, Aurisbel Ávila-Guevara
-
SUPPLEMENTARY FERTILIZATION MANAGEMENT AND TWO SOIL IMPROVEMENT EFFECT IN CORN
Román Gordón-Mendoza, Jorge Franco-Barrera
-
LINES OF BEAN (Phaseolus vulgaris L.) WITH HIGH OF IRON AND ZINC
Emigdio Rodríguez-Quiel, Román Gordón-Mendoza, Francisco González-Guevara, Eric Quirós-Rodríguez, Ricardo Hernández-Rojas, Eduardo Palacios-Rodríguez, Audino Melgar-Moreno
-
STATISTICAL TOOLS FOR EVALUATION AND SELECTION OF CORN HYBRIDS ACROSS MULTIPLE ENVIRONMENTS AND YEARS
Román Gordón-Mendoza, Ismael Camargo-Buitrago
-
SELECTION OF A CORN HYBRID FOR SYSTEMS MECHANIZED PLANTING IN PANAMA
Román Gordón-Mendoza, Jorge E. Franco-Barrera, Francisco P. Ramos-Manzané, Félix M. San Vicente-García
-
AGRICULTURAL RESEARCH, A PROFITABLE INVESTMENT: ECONOMIC IMPACT OF IDIAP TECHNOLOGIES IN SIX PRODUCTIVE SECTORS
Liliam M. Marquínez-Batista, Jaime Espinosa-tasón, Mariana Cruz-Chu, Luis Hertentains-Caballero, Román Gordón-Mendoza, Rodrigo A. Morales-Araúz, Ismael Camargo-Buitrago, Evelyn Quirós-Mclntire, Luis A. Barahona-Amores, Arnulfo Gutiérrez-Gutiérrez, Roberto Rodríguez-Chávez, Emigdio Rodríguez-Quiel, Francisco González-Guevara, José L. Jorge-Ramos, José A. Guerra-Murillo, Nilso García, Roberto Quiroz
-
EVOLUTION OF THE YIELD AND SUPPLY OF INDUSTRIAL TOMATOES IN PANAMA (1969-2023)
Jaime A. Espinosa-tasón, Liliam M. Marquínez-Batista, Roberto Quiroz
Authors
References
Agbetoye, LAS. 1999. Developments in Cassava Harvesting Mechanization West Indian Journal of Engineering 22(1):11-19.
Aristizábal, J; Sánchez, T; Mejía L, D. 2007. Guía técnica para producción y análisis de almidón de yuca (en línea). FAO, Rome (Italy). Dirección de Infraestructura Rural y Agroindustrias. Consultado 20 ago. 2017. Disponible en ftp://ftp.fao.org/docrep/fao/010/a1028s /a1028s01.pdf
Gutiérrez P, H; de la Vara S, R. 2009. Control estadístico de calidad y seis sigma. Segunda Edición. McGraw-Hill. 482 p.
Kolawole, OP; Agbetoye, LAS; Ogunlowo, AS. 2010. Sustaining world food security with improved cassava processing technologies: The Nigerian experience (en línea). Sustainability, 2: 3681- 3694. Disponible en http://www.mdpi.com/2071-1050/2/12/3681/pdf
Morán G, RA; Saavedra S, DA. 2008. Cadena de valor de la yuca en Panamá. Instituto de Mercadeo Agropecuario (IMA). 11 p.
OIT. 2004. Estudio del proceso de trabajo y operaciones, perfil de riesgos y exigencias laborales en el cultivo y enmpaque de la yuca. CR.
Ospina Patiño, B; Cadavid López, LF; García González, ML; Alcalde Torres, CA. 2007. Mechanization of cassava production in Colombia. In Howeler, Reinhardt H. (ed.). Cassava research and development in Asia: Exploring new opportunities for an ancient crop: Proceedings of the seventh regional workshop held in Bangkok, Thailand, Oct 28-Nov 1, 2002. Centro Internacional de Agricultura Tropical (CIAT), Cassava Office for Asia, Bangkok, TH. p. 277-287.
Palacio-Rangel, MI; Ortíz Martínez, G; Cervantes-Escoto, F. 2016. La mecanización agrícola. Conferencia en Memorias del Quinto Congreso Nacional de Ciencias Sociales, CUCSH, Universidad de Guadalajara, MX.
Villarreal Núñez, JE; Sáez Cigarruista, AE; Núñez Cano, JI; Barahona Amores, LA; Castro Villarreal, JA. 2016. Características morfológicas del Pedón de la Estación Experimental El Ejido de Los Santos. Sin Publicar.
Wooldridge, JM. 2010. Introducción a la econometría. Un enfoque moderno. 4ª. Edición. Cengage Learning, Inc. 865 p.